T 777 V3
Seven-channel AV surround receiver with a built-in seven-channel power amplifier, rated 7 x 140W (FTC) and 7 x 80W at full disclosure. Aimed at home-cinema setups that want a modular, upgradable receiver with BluOS streaming; no longer sold by the maker.
- 7 x 140W (FTC) seven-channel amplifier
- 7 x 80W full disclosure, all channels driven
- THD below 0.08% at rated power
- MDC modules: VM300 video (with BluOS) and AM230 audio
- Standby power below 0.5W
- Weighs 20.5kg; 435 x 172 x 425mm
Foto
5Annunci
Ancora nessun annuncio di questo modello
Quando qualcuno venderà un T 777 V3, qui compariranno gli annunci e lo storico delle vendite.
Vendine uno ugualeDescrizione
The T 777 V3 is a seven-channel AV receiver that combines a preamplifier and a seven-channel power amplifier in one chassis. Rated output is 7 x 140W under the FTC method and 7 x 80W with all channels driven at full bandwidth, with 160W per channel into 8 ohms and 260W into 4 ohms at the dynamic ratings. Distortion is below 0.08% at rated power and the damping factor is above 60 at 8 ohms.
The receiver is built around NAD's Modular Design Construction (MDC) system. Upgrade slots accept a VM300 video module, which brings BluOS, and an AM230 audio module. BluOS firmware releases are listed among its downloads, and an internet update guide is provided for keeping the unit current.
The unit measures 435 x 172 x 425mm and weighs 20.5kg. Standby consumption is below 0.5W. The model is listed in the maker's archive and is no longer sold new. Manuals are available in English, German, French, Dutch, Italian, Swedish and Chinese, along with a quick setup guide and a data sheet.
Video
Specifiche
- Marca
- NAD
- Modello
- T 777 V3
- Categoria
- Hi-Fi e audio domestico › Amplificatori
Amplifier
- FTC power
- 7 x 140W
- Full Disclosure Power (all channels driven simultaneously at full bandwidth at r
- 7 x 80W
- Power at 8 Ohms
- 160W (22.0BW)
- Power at 4 Ohms
- 260W (24.1dBW)
- Total harmonic distortion at rated power
- <0.08%
- IM distortion at rated power
- <0.08%
- Damping factor, 8 Ohms
- >60
- Input sensitivity and impedance
- 1.15V (ref. 8 Ohms, VOL at 0dB)
- Frequency response
- ±0.8dB (ref. 1kHz, 20Hz-20kHz)
- Signal/noise ratio (rated power)
- >92dB (ref. rated power at 8 Ohms, A-Weighted)
- Signal/noise ratio (1W)
- >82dB (ref. 1W at 8 Ohms, A-Weighted)
Preamplifier
- Frequency response
- ±0.5dB (ref. 20Hz – 20kHz)
- Signal-to-noise ratio
- >88dB (ref. 2V, A-Weighted)
- Total harmonic distortion
- <0.01%
- Input sensitivity
- 330mV (ref. 2V)
- Maximum output level
- >4V
Power
- Standby power
- <0.5W
- Idle power
- >70W (120V version only)
MDC Upgrade Modules
- Video module
- VM300 (With BluOS)
- Audio module
- AM230
Physical
- Unit dimensions (W x H x D)
- 435 x 172 x 425mm (Gross)
- Net weight
- 20.5kg (45.2lb)
- Shipping weight
- 24.2kg (53.4lb)