Ania Pro
The Ania Pro is a moving-coil phono cartridge with a Vital-profile nude diamond stylus and a hand-wound micro coil in a rigid PPS body. It is aimed at turntable owners wanting an MC upgrade, and is an optional fit on the Planar 6 and Planar 8.
- Moving-coil cartridge with Vital-profile nude diamond stylus
- Hand-wound coil on iron micro cross, neodymium magnet
- Glass-filled PPS (Fortron) body with stainless steel inserts
- Three-point fixing sets overhang automatically
- Optional on Planar 6 and Planar 8, factory fitted available
- Lifetime warranty against manufacturing defects
Foto
8Annunci
Ancora nessun annuncio di questo modello
Quando qualcuno venderà un Ania Pro, qui compariranno gli annunci e lo storico delle vendite.
Vendine uno ugualeDescrizione
The Ania Pro is a low-output moving-coil cartridge that uses a hand-wound coil on an iron micro cross, driven by a high-power neodymium magnet. The stylus is a Vital-profile nude diamond on a tapered aluminium cantilever, and the coil is wound from 0.018 mm wire. The generator is undamped, with no tie wire, and works with a rhomboid cantilever pivot.
The body is moulded from a glass-filled polymer, PPS (Fortron, 40% glass), chosen for its hardness and dimensional stability, and carries stainless steel inserts. It is fixed to the headshell with a three-point mounting that also sets overhang automatically. A red rigid cover protects the internal fine wires during fitting.
It needs a moving-coil capable phono input. The recommended load is 100 Ω and 1000 pF, with gain set high, which is the On position on Rega phono stages. It is offered as an optional upgrade, including factory fitted, on the Planar 6 and Planar 8 turntables.
Video
Specifiche
- Marca
- Rega
- Modello
- Ania Pro
- Categoria
- Attrezzatura DJ › Testine e puntine
Electrical
- Cartridge type
- Moving coil (MC)
- Nominal output voltage
- 350 μV
- Output impedance
- 10 Ω
- Channel balance
- ≥ 20 μV
- Separation
- ≥ -29 dB
- Coil wire
- 0.018 mm
Playback
- Tracking pressure
- 1.75 - 2.00 g
- Stylus
- Vital profile nude diamond
- Cantilever
- Aluminium tapered
- Magnet
- Neodymium
- Generator
- Iron micro cross assembly
Load settings for adjustable MC stages
- Impedance
- 100 Ω
- Input load impedance
- 100 Ω
- Capacitance
- 1000 pF
- Gain setting
- High ('On' position for Rega phono stages)
Physical
- Mass
- 6 g
- Body material
- PPS (Fortron), 40% glass
- Mounting
- Three point fixing
- Stylus cover
- Red rigid cover
Warranty
- Warranty
- Lifetime limited warranty against manufacturing defects