Da Vinci V2.1
The da Vinci V2.1 is a moving-coil phono cartridge with an aluminium body, boron cantilever and 24-carat gold coils. It suits vinyl listeners who want a lightweight, low-output cartridge with a 6.8 g total weight.
- Moving-coil cartridge, 6.8 g total weight
- Boron cantilever, clearaudio Prime Line stylus
- Output 0.5 mV at 5 cm/s, 50 Ω impedance
- Eight-magnet patented generator system
- 24-carat gold coils, point-symmetrical layout
- Aluminium body with 30-micron ceramic coating
Foto
8Annunci
Ancora nessun annuncio di questo modello
Quando qualcuno venderà un Da Vinci V2.1, qui compariranno gli annunci e lo storico delle vendite.
Vendine uno ugualeDescrizione
The da Vinci V2.1 is a moving-coil (MC) phono cartridge built around a boron cantilever and a clearaudio Prime Line diamond stylus profile. Total system weight is 6.8 g, and the output voltage is 0.5 mV at 5 cm/s. The needle compliance is 15 µ/mN and the recommended tracking force is 2.8 g (± 0.2 g).
The body is aluminium with a 30-micron ceramic coating, intended to drain resonances efficiently. Inside, a patented construction uses eight magnets to give a high field-line density. The 24-carat gold coils are arranged in an absolutely point-symmetrical layout. The cartridge is assembled by hand and was developed in Erlangen, Germany.
The cartridge mounts on a tonearm headshell or arm tube and connects to a phono stage suited to a low-output MC cartridge with a 50 Ω system impedance. Quoted performance includes a 20 Hz – 20 kHz frequency response, 25 – 30 dB channel separation and channel balance under 0.5 dB. The maker gives a 2-year warranty when the registration card is returned within 14 days of purchase.
Video
Specifiche
- Marca
- Clearaudio
- Modello
- Da Vinci V2.1
- Categoria
- Attrezzatura DJ › Testine e puntine
Audio
- Output voltage (at 5 cm/s)
- 0.5 mV
- Frequency response
- 20 Hz – 20 kHz
- Channel separation
- 25 – 30 dB
- Channel balance
- < 0.5 dB
- Tracking ability
- 80 µm
- System impedance
- 50 Ω
- Needle compliance
- 15 µ/mN
Stylus and Generator
- Cantilever / stylus profile
- Boron / clearaudio Prime Line
- Coil arrangement
- Absolutely point-symmetrical
- Coil material
- 24-carat gold
- Magnets
- 8 (patented construction)
Setup
- Recommended tracking force
- 2.8 g (± 0.2 g)
Physical
- Weight of complete system
- 6.8 g
- Body
- Aluminium with 30-micron ceramic coating
Warranty
- Manufacturer warranty
- 2 years (registration card returned within 14 days of purchase)