Vertex III OW-VJ63L
ELAC Fuori produzione

Vertex III OW-VJ63L

On-wall speaker with a 2½-way sealed cabinet, a JET folded ribbon tweeter and two 6-inch woofers. It suits custom-install and home theater setups, as a surround or front-channel speaker, mounted vertically or horizontally.

  • 2½-way sealed on-wall design with two 6-inch woofers
  • JET folded ribbon tweeter, response 38 Hz to 50 kHz
  • Vertical or horizontal mounting via keyhole inserts or brackets
  • Rear switch retunes the tweeter for mounting orientation
  • 4 ohm nominal impedance, 88 dB sensitivity
  • Wall mount brackets included
Vendine uno uguale

Foto

6

Annunci

Ancora nessun annuncio di questo modello

Quando qualcuno venderà un Vertex III OW-VJ63L, qui compariranno gli annunci e lo storico delle vendite.

Vendine uno uguale

Descrizione

The OW-VJ63L is a tall on-wall loudspeaker from the Vertex III Custom Series. It pairs a JET folded ribbon tweeter, built on the air motion transformer principle, with two 6-inch woofers in a sealed cabinet. Its frequency response runs from 38 Hz to 50 kHz and the crossover points are 450 Hz and 2,400 Hz. The drivers share the sonic character of the maker's home audio speakers, so they can be mixed with other ranges in a home theater.

The cabinet can be hung vertically or horizontally using four recessed keyhole inserts, or with the supplied brackets. Routed channels at the back let cable sit in the wall cavity so the speaker mounts flush. A switch on the rear changes the tweeter tuning to suit the chosen orientation.

The speaker is connected to an amplifier rated for 40 to 200 watts and presents a 4 ohm nominal impedance. It has a black baffle and a black fabric grille.

Specifiche

Marca
ELAC
Modello
Vertex III OW-VJ63L
Categoria
Hi-Fi e audio domestico › Casse

Audio

Speaker type
2 1/2-way, sealed cabinet
Tweeter
Jet Folded Ribbon
Woofers
2x6
Crossover frequency
450 / 2,400 Hz
Frequency response
38 to 50,000 Hz
Sensitivity
88 dB at 2.83 V/1 m

Power

Recommended amplifier power
40 to 200 Watts
Nominal/peak power handling
130/170 Watts
Nominal impedance
4 Ohm

Mounting

Mounting options
4 recessed keyhole inserts, vertical or horizontal
Tweeter tuning
Rear switch for vertical or horizontal mounting
Cable routing
Routed channels for flush wall mounting

Physical

Finish
Black baffle
Grille
Black Fabric Grille
Height
46.61 in / 1184 mm
Width
9.76 in / 248 mm
Mounting depth
3.82 in / 97.0 mm
Weight
36.15 lbs / 16.4 kg

In the box

Wall mount brackets
Included

Dati: elac.com; foto: ELAC product page · aggiornato il 2026-10-13 · Hai trovato un errore? Scrivici