Vintage Classic Gold X SP
Floorstanding two-way speaker from Fyne Audio's Vintage Classic Gold SP series, built around a 250mm IsoFlare point-source driver and a 75mm titanium compression tweeter in a walnut-veneered birch ply cabinet. Aimed at hi-fi listeners who want a large, easy-to-place speaker driven by 20–280 W amplifiers.
- 250mm IsoFlare point-source driver with FyneFlute surround
- 75mm titanium alloy dome compression tweeter
- Sensitivity 94dB, nominal impedance 8 ohm
- Frequency response 28Hz–26kHz (-6dB, in room)
- Bi-wired crossover with HF and presence adjustment
- Birch ply cabinet, walnut finish, 43kg each
Foto
8Annunci
Ancora nessun annuncio di questo modello
Quando qualcuno venderà un Vintage Classic Gold X SP, qui compariranno gli annunci e lo storico delle vendite.
Vendine uno ugualeDescrizione
The Vintage Classic Gold X SP is a two-way floorstanding loudspeaker sold as a pair. Its 250mm IsoFlare driver uses a multi-fibre bass/midrange cone with a FyneFlute surround, and the 75mm titanium alloy dome compression tweeter sits at its centre so both work as a single point source. A neodymium magnet system drives the unit, and the crossover is set at 750Hz.
The cabinet is made from high-density birch ply with extensive internal bracing and has a twin-cavity design with a downward-firing port. A BassTrax Tractrix diffuser spreads bass energy evenly in all directions, which is intended to make positioning less critical. The finish is walnut veneer with gold accents.
The passive crossover is bi-wired, low loss and cryogenically treated. Two adjustments let the listener trim the sound: high frequency energy (750Hz to 26kHz) and presence (2.5kHz to 5.0kHz), each by +/- 3dB. Sensitivity is 94dB and impedance is 8 ohms, so the speaker suits a wide range of amplifiers from 20 to 280 W RMS.
Video
Specifiche
- Marca
- Fyne Audio
- Modello
- Vintage Classic Gold X SP
- Categoria
- Hi-Fi e audio domestico › Casse
Audio
- System type
- 2 way, downwards firing port, twin cavity, BassTrax™ Tractrix diffuser
- Frequency response (-6dB typical in room)
- 28Hz- 26kHz
- Sensitivity (2.83 Volt @ 1m)
- 94dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 750Hz
- Crossover type
- Bi-wired passive low loss, 2nd order low pass, 2nd order high pass. Deep Cryogenic Treatment.
- System adjustments
- High frequency energy (750Hz - 26kHz) +/- 3dB, Presence (2.5kHz - 5.0kHz) +/- 3dB
Drivers
- Drive unit complement
- 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 75mm titanium alloy dome compression tweeter, neodymium magnet system
- S-Trax position (from cabinet front edge)
- 110mm (4.3")
- SuperTrax position (from cabinet front edge)
- 86mm (3.4")
Power
- Recommended amplifier power (Watt RMS)
- 20 - 280
- Continuous power handling (Watt RMS)
- 140
- Peak power handling (Watt)
- 560
Physical
- Dimensions (HxWxD)
- 918 x 450 x 381mm (36.1 x 17.7 x 15.0")
- Net weight (each)
- 43kg
- Finishes
- Walnut
- Cabinet construction
- High density birch ply with extensive internal bracing
- Sold as
- Per pair
- SKU
- F80000980