DiNET DAN-RX2
A 2-channel Dante and AES67 network receiver that converts digital audio to analog at 24-bit/96kHz. It gives balanced XLR outputs plus a headphone amp, for PA feeds, press distribution and personal monitoring.
- 2-channel Dante / AES67 network receiver
- 24-bit/96kHz digital-to-analog conversion
- Balanced XLR outputs with ground lift
- Headphone amp with own level control
- Powered by external supply and/or PoE
- Optional SA series rack adaptor for 19" racks
Foto
6Annunci
Ancora nessun annuncio di questo modello
Quando qualcuno venderà un DiNET DAN-RX2, qui compariranno gli annunci e lo storico delle vendite.
Vendine uno ugualeDescrizione
The DAN-RX2 is a stereo digital-to-analog endpoint for Dante or AES67-compliant networks. It takes two channels from the network and delivers them as analog audio, with 24-bit/96kHz conversion, for connection to professional audio systems.
Two balanced XLR outputs can be set for mic or line level connection and include a ground lift. A separate headphone amplifier with its own level control is provided for local testing or personal monitoring. Typical uses include feeding a small PA in an overflow room, sending audio to press recorders or a press box, and giving musicians or staff their own monitor mix from anywhere on the network.
The unit connects through an RJ45 network port that works with Neutrik etherCON connector carriers. It can be powered from the included external power supply, from Power over Ethernet, or both at once for redundancy. A 19" rack mount is possible with the optional SA series rackmount adaptor kit.
Video
Specifiche
- Marca
- Radial Engineering
- Modello
- DiNET DAN-RX2
- Categoria
- Studio › Interfacce audio
Audio
- Channels
- 2
- Conversion
- 24bit/96kHz digital to analog
- Network standard
- Dante, AES67-compliant
- Function
- Dante network receiver (digital to analog endpoint)
Outputs
- Analog outputs
- Balanced XLR, mic or line level
- Ground lift
- Yes, on XLR outputs
- Headphone output
- Built-in headphone amplifier
- Headphone level
- Separate level control
Connectivity
- Network connection
- RJ45, compatible with Neutrik etherCON connector carriers
- Network protocols
- Dante, AES67
Power
- Power options
- Included external power supply, Power over Ethernet (PoE)
- Redundant powering
- External supply and PoE used simultaneously
- Power supply part no.
- R800 9415
Physical
- Rack mounting
- 19" rack with optional SA series rackmount adaptor kit
- Part no.
- R800 1065 00
In the box
- Power supply
- External power supply included